Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may want to reset your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a easy process that can be completed in just a few procedures.

• First ensuring your red dot sight is powered on.
• Locate the small reinitialize button on the side of the sight.
• Employ a small object to press and hold the reset switch for approximately three seconds.
• Let go the reset button and your Holosun EPS Carry Red Dot sight will power cycle.
• Your red dot sight should now be returned to its factory settings.

Return to Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it back to standard configuration is a breeze. First, find the tiny button on the rear of your optic. Then, sustain it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now reset to its factory settings, ready for consistent targeting.

restore Your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

• Hold down the power button for approximately 7 seconds.
• An indicator will flash, indicating that the reset is in progress.
• Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and test your sight's functionality. If you encounter any further difficulties, don't hesitate to contactHolosun's customer support.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

• Beginning with, Activate your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• While continue holding these buttons, press the power button once.
• The display will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically deactivate.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Restore your Holosun EPS Carry through a Factory Default Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will restore your sight to its factory settings, clearing any custom configurations you've made. To accomplish this reset, how to factory reset Holosun EPS Carry red dot adhere to these simple steps:

• Initially, identify the reset button on your EPS Carry.
• Then, engage a thin object, like a pen tip, to depress the reset button.
• While maintain the reset switch engaged, activate your EPS Carry.
• The sight will flash a message confirming that the reset is successful.

Once the reset is finished, your EPS Carry will be back to its factory settings.

Report this wiki page